Rack End for SUBARU IMPREZA | 34140-AC000

Outer Tie Rod End

Outer Tie Rod End

This Tie Rod End is applicable to NISSAN TIIDA, Models (C12, B17) from 2013~ as well as Nissan Versa Note 2012 ~ 2017.

More
Arm Bushing

Arm Bushing

This Arm bushing is Applicable to SUBARU IMPREZA, Models (G12, G22) from 2007, and many other models.

More

Over 30 Years Rack End for SUBARU IMPREZA | 34140-AC000 | Steering & Suspension Parts for Vehicles - GAP

Based in Taiwan since 1988, Great Auto Parts Industrial CO., LTD. is a Rack End for SUBARU IMPREZA | 34140-AC000 | car suspension and steering parts manufacturer. ISO and TS16949 certified with ERP implemented car & truck ball joints and parts, including Ball Stud, Ball Pin, Pillow Ball, Tie Rod End, Ball Joints, Stabilizer Links, Rack Ends, Remanufacturing Used Chassis Partsm, etc.

For car suspension and steering parts manufacturing, GAP has an in-house test lab with precision measuring equipment to verify all car & truck ball joints and parts processes. Following the American standards SAE J490, J491, as well as the German automotive aftermarket quality standards and specs. Currently the models developed include, European, American, Japanese and Korean cars with the ranges up to 2500 items and 150 more parts developed every year.

GAP has been offering customers high-quality car suspension and steering parts since 1988, both with advanced technology and 31 years of experience, GAP ensures each customer's demands are met.

Rack End for SUBARU IMPREZA | 34140-AC000

RESB-0257

Front R/L Rack End for SUBARU IMPREZA,Front R/L Inner Tie Rod End for SUBARU IMPREZA,Front R/L tie rod rack end for SUBARU IMPREZA,Front R/L inner rod for SUBARU IMPREZA

Rack End, SUBARU IMPREZA, 1993~1997, R/L
Rack End, SUBARU IMPREZA, 1993~1997, R/L

This Rack end is applicable to SUBARU IMPREZA Car Models from 1993~1997.
The Housing Material is S18C and The Ball Pin was made of SCM440 with heat treatment hardness HRC 30 ± 3.
The Surface treatment is Manganese phosphate.
The Oscillating torque is under 7.2 Nm.
The Swing angle is 60 degrees at least and up to 68 degrees.
Laser etched manufactured tracking batch codes.
Pull or Push out strength is equal to OE or even higher.
OE replacement directly without fitting issues.
Small quantities are acceptable, MOQ is as low as 30 pcs.
5 years or 100,000 KM warranties with conditions applied.
Suspension & steering parts supplier from Taiwan.

OE Number

34140-AC000
34140-AA030
34140-FC000
34140AC000
34140AA030
34140FC000

MOOG Number

EV257


Press Release